Ricoh MT-P2 - Page 240

Display Details Recovery
03
Download Error E03
Power off/on
Controller ROM update error 3 • Turn the machine off/
on
• Install the missing
ROM DIMM
The ROM for the write operation does not
exist.
04
Download Error E04
Power off/on
Controller ROM update error 4 • Turn the machine off/
on
• Set DIP SW 1 to ON
and retry
• Replace RAM DIMM
• Replace controller
board
GZIP data confirmation fails. (CRC value
check)
05
Download Error E05
Power off/on
Controller ROM update error 5 • Turn the machine off/
on
• Set DIP SW 1 to ON
and retry
• Replace RAM DIMM
• Replace controller
board
Error occurs when writing to the device.
06
Download Error E06
Power off/on
Controller ROM update error 6 • Turn the machine
power off/on.
• Set controller
DIPSW-1 to ON to
force the machine to
write to ROM.
• If you cannot force
the machine to write,
replace the controller
board.
CPU clock error.
19
Download Error E19
Power off/on
Controller ROM update error 7
• Software defective
Schedule data is unclear.
20
Down Error E20
Power Off/On
System error 1 (+SC991) • Turn the machine off/
on and re-try
• Replace controller
board
The physical address cannot be mapped.
Software/hardware is defective
Overview
239
4