• The current selection is marked with a large asterisk.
• Press or to display on the 2nd line the item to select.
• When the item that you want to select is displayed on the second line, press [#Enter]. The selected
item is marked with an asterisk.
• Press [Escape] to return to the previous level.
Leaving the SP Mode
1. When you are finished with SP selection, press [Escape] until you see “2.Engine”.
2. Press to display “3.End”.
3. Press [#Enter] to display “Offline”.
4. Press [Online] to set the printer online.
• Turning the printer power off and on leaves the SP mode, and returns the printer online in normal
operation mode.
SP Mode Print (SMC Print)
1. To enter the SP mode, push and hold down for 5 sec. then push [#Enter].
<Engine>
1.Feed
2. Press or until you see “5.Mode”.
<Engine>
5.Mode
3. Press [#Enter].
SP5024
mm/inch Display
4. Press to select SP5990.
SP5990 >>
SP Print Mode
5. Press [#Enter].
Service Program Mode
299
To Next Page
Loading...
