Ricoh MT-P2 - Additional SC Codes Printed in SMC Report

21 Duplex transport sensor 2 71 Duplex transport sensor 2
22 Duplex transport sensor 3 72 Duplex transport sensor 3
23 Duplex inverter sensor 73 Duplex inverter sensor
24 1-Bin tray (Japan Only) 74 1-Bin tray (Japan Only)
Finisher B706 Jam Codes
No. Location Related SC Code
141 Entrance Sensor
142 Proof Tray Exit Sensor
143 Exit Sensor
144 Staple Entrance Sensor
145 Exit Sensor after jogging
148 Upper Transport Motor
149 Shift Motor SC733, SC726
150 Jogger Fence Motor SC722
151 Shift Roller or Guide Plate Motor SC732, SC736
153 Stapler Unit SC724, SC738, SC740, SC741
155 Feed Out Belt Motor SC725
156 Punch Hole Motor SC729
Additional SC Codes Printed in SMC Report
These codes are also used in the SMC report. Codes that have the same number in this series are identified
by an additional 4-digit hexadecimal number.
820 0001 TLB conversion (store) exception error
• Unexpected error in CPU de-
vice:
• Controller board defective
820 0002 TLB miss (load) exception error
820 0003 TLB miss (store) exception error
Service Mode
285
4