Ricoh MT-P2 - Input;Output Check; Printer Input Check: SP5803

Input/Output Check
Printer Input Check: SP5803
Enter the SP mode and select SP5803.
1. Press  together (5s), release, then press [#Enter].
System Ver.1.00
1. Service
2. Press .
System Ver. 1.00
2. Engine
3. Press [#Enter].
<Engine>
1. Feed
4. Press  to display “5. Mode”.
<Engine>
5. Mode
5. Press [#Enter].
SP5024
mm/inch Display
6. Press  to display “Input Check”.
SP5803 >>
Input Check
7. Press [#Enter].
SP5803-001
Paper Feed 1
8. Press  or  to select the item to check.
SP5803-013
Full Exit Tray 2
5. Service Tables
406
5