EasyManua.ls Logo

Ricoh MT-P2 - Page 243

Ricoh MT-P2
537 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display Details Recovery
Operation panel or language download
failed. For this error, sometimes the mes-
sage may not be displayed.
43
Download Error E43
Module ID
Card No. xx/xx
Download result failure 4
Turn the machine off/
on and re-try
Print download failed.
44
Download Error E44
Module ID Card No.
Download result failure 5 Turn the machine
power off/on.
Set controller
DIPSW-1 to ON to
force the machine to
write
If you cannot force
the machine to write,
replace the controller
board.
The data targeted for the write operation
could not be accessed.
50 No Valid Data E50
Download invalid
Use the correct SD
card.
The source data for the update could not
be authenticated.
51 (no display)
Remote ROM update failure 1
Turn the machine
power off/on and try
again.
The source data for the ROM update is
corrupted because the machine is operat-
ing and an SC code has been issued.
52 (no display)
Remote ROM update failure 2
Try again with the
correct data.
The source data received for the ROM up-
date is corrupted; it failed a SUM check
due to its abnormal length.
53 (no display)
Download result failure 6
Do the download
procedure again.
The previous download in progress was
cancelled.
4. Troubleshooting
242
4

Table of Contents

Related product manuals