Ricoh MT-P2 - Page 428

6. Push [#Enter].
<On/Off>
*ON
7. Push [Esc].
SP5857-001
On/Off
8. Do the next procedure to select the target.
To Select the Target for the Debug Log File
You can select either the HDD (default) or the SD card as the target. This procedure shows you how to
select the SD card.
1. Push .
SP587-002
Target
2. Push [#Enter].
<Target>
*2:HDD
3. Push .
<Target>
3:SD
4. Push [#Enter].
<Target>
*3:SD
5. Push [Esc] twic.
SP5857 >>
Save Debug Log
6. Do the next procedure to select the events that you want to record in the debug log file.
To Select Events
1. Push .
Using the Debug Log
427
5