Riso SF9490 - Page 121

Chapter 7 Setting the Operation Conditions
119
7
[Jump Wing Control]
You can change the default setting of [Jump Wing Control] (A 86).
OFF, ON
B[Jump Wing Control] is displayed only when the spe-
cial paper has been set in advance. For more infor-
mation, consult your dealer or authorized service
representative.
[Paper Ejection Adj]
You can change the default setting of [Paper Eject Adj] (A 82).
[Air Blow]: OFF,
ON
[Separation Fan]: OFF, 1, 2, 3,
4
[Suction Fan]: OFF, 1, 2, 3,
4
[Pre-suction Fan]:
OFF, ON
[Scan Data Folder]
You can change the default setting of [Directory] (A 111) in the
scanning mode.
1 to 6_FOLDER
[Quick Master Making]
You can change the default setting of [Quick Master Making]
(A 57).
OFF, ON
Setting item Description