Riso SF9490 - Changing the Name of [Job Memory]; Erasing [Job Memory]

Chapter 5 Useful Functions
97
5
Changing the name of [Job Memory]
1
Touch [Job Memory] in the [Func-
tions] tab screen.
The [Job Memory] screen is displayed.
2
Touch [Rename].
3
Touch the button whose name you
want to change.
4
Change the name.
(A 28 “[Rename] screen”)
5
After entering a new name, touch
[OK].
The [Job Memory] screen is displayed.
6
Touch [Close].
The basic screen is displayed.
Erasing [Job Memory]
1
Touch [Job Memory] in the [Func-
tions] tab screen.
The [Job Memory] screen is displayed.
2
Touch [Clear].
3
Touch the button that you want to
erase.
The [Status Check] screen is displayed.
4
Check the settings.
Check whether the setting can be erased.
5
Touch [OK].
The [Job Memory] screen is displayed.
6
Touch [Close].
The basic screen is displayed.
BYou can also display the [Job Mem-
ory] screen by pressing the [U] key.
BIf the name does not fit in the dis-
play area, the latter part of the name
is displayed as “...”.
BYou can also display the [Job Mem-
ory] screen by pressing the [U] key.