Chapter 2 Basic Operations
47
2
4
Touch [Details].
5
Check the original data to be
printed.
6
Touch [Retrieve].
Follow steps 10 to 13 in “Printing from [Stor-
age]” for the rest of the procedure.
Printing from [USB print (Auto pro-
cess)]
You can print the original data that is saved in the USB
flash drive by performing the settings shown below.
• In the printer driver dedicated for the USB flash drive
printing, set [USB print (Auto process)] for [Output:].
1
Make preparations for this
machine.
Perform steps 1 to 4 in “Printing from [Storage]”
(A 45).
2
Insert the USB flash drive that con-
tains the original data into the USB
slot.
• When [Auto Process] is [ON]:
Master making is followed by the printing pro-
cess.
• When [Auto Process] is set to other than
[ON]:
Perform the necessary operation according to
the settings.
(A 40 “When [Auto Process] is set to other
than [ON]”)
3
Remove the USB flash drive.
When master making is complete, remove the
USB flash drive.
BIf the [USB Job List] screen does
not appears automatically, touch
[USB Job List] in the [Functions] tab
screen.
BTo manage the original data, see the
page below.
(A 74 “Managing the Saved Origi-
nal Data [Storage], [USB Job List]”)
BYou cannot print any original data (PDF
file, etc.) that is saved with another
method.
BDo not remove the USB flash
drive while the “Accessing to the
USB flash drive” message is dis-
played. It may cause a data loss
or damage the USB flash drive.
BAfter master making, the original
data in the USB flash drive is erased
automatically.
To Next Page
Loading...
