Chapter 7 Setting the Operation Conditions
122
[ECO mode]
This item is set for reducing the power consumption during print-
ing.
When this item is set to [ON], this machine enters the following
states:
• Printing is performed at a lower pressure than when this item is
set to [OFF].
• The screen display is dimmer than when this item is set to [OFF].
• Neither [Print Speed] nor [Print Density] (A 118) can be changed
any longer.
• The [KECO mode] icon is displayed in the message area in the
basic screen.
OFF, ON
BWhen [Ink Saving] is set to on, the [SInk Saving] icon is
prioritized over the [
KECO mode] icon on the display.
[User Management]
This setting enables individual user management and enhanced
security.
A 129 “User Management”
[Protect]
This item is set for controlling the used masters.
A 135 “Protect”
[Auto Idling]
You can set [Idling Action] (A 98) to be performed automatically
during the next master making if the print drum (cylinder) has not
been used for a certain amount of time.
[Idling Action] is an operation that ensures the ink usability and
stability.
To increase the ink usability and stability, set a higher value in
[Rotation].
OFF,
ON
[Non-Use Time]: 1 to
12 hour
[Rotation]:
1 to 3
[Auto Page Renewal]
You can set [Renew Page] (A 81) to be performed automatically
when the number of printed copies has reached the specified
number. You can also specify the number of proof copies after
master making is performed again.
OFF, ON
[Auto Renewal Point]: 1 to
1000 to 9999
[Sample Copy Output]: 0 to
3 to 99
[Minimum Print Q'ty]
You can set master making to be performed only when the entered
number of printed copies is more than the specified number.
OFF, ON
2 to 99
BYou can lock the setting of [Minimum Print Q'ty], so that it
cannot be changed. For more information, consult your
dealer or authorized service representative.
[Stack Guide Ctrl]
*
When the optional auto-control stacking tray is installed, specify
the paper guide to widen when the paper guides positioning button
is pressed.
End,
Side, End & Side
[Service Info. Mail]
This item is set for sending e-mails by [Service Info. Mail] (A 106).
A 106 “Sending E-Mails of the Operation His-
tory [Service Info. Mail]”
BThis setting item may not be displayed depending on
your system configuration. For more information, consult
your dealer or authorized service representative.
Setting item Description
To Next Page
Loading...
