Chapter 2 Basic Operations
41
2
4
Check the master making condi-
tions.
(A 25 “Touch Panel Displays”)
5
Press the [START] key.
After master making, the printing process
starts. Operation does not pause after a proof
copy has been output.
After the printing process is complete, the oper-
ation pauses and then master making of the
next page starts. Repeat steps 4 to 5 for each
page.
■ When [Pause before "Print"] is selected
After master making of each page is performed auto-
matically, a proof copy is output, and then the opera-
tion pauses.
1
Check the printing conditions.
Check the printing position and density on the
proof copy. Perform the required settings as
necessary.
2
Press the [START] key.
The printing process starts. After the printing
process is complete, master making of the next
page starts. After outputting a proof copy, the
operation pauses. Repeat steps 1 to 2 for each
page.
■ When [OFF] is selected
Before the master making process and before the
printing process of each page, the operation pauses.
1
Perform steps 1 to 3 in “When
[Pause before "Master-making"] is
selected”.
2
Check the master making condi-
tions.
(A 25 “Touch Panel Displays”)
3
Press the [START] key.
Master making starts. After master making is
complete, a proof copy is output and then the
operation pauses.
4
Check the printing conditions.
Check the printing position and density on the
proof copy. Perform the required settings as
necessary.
5
Press the [START] key.
The printing process starts. After the printing
process is complete, the operation pauses and
then master making of the next page starts.
Repeat steps 2 to 5 for each page.
To Next Page
Loading...
