5. FASTENING SETTING mode (Type S)
5-48
●Contents of REVERSE SETTING
a. SPEED
The rotation speed of reverse operation is configured.
(The content is the same as for constant rotation speed of SOFT START.
Refer to Chapter 4 of the USER’S MANUAL).
SETTING RANGE
0001h ~ 4000h
RECOMMENDED
SETTING
4000h (It varies depending upon using conditions)
b. ACCELERATION
The acceleration speed of reverse turning is configured
(The content is the same as for acceleration rate of SOFT START.
Refer to Chapter 4 of the USER’S MANUAL)
SETTING RANGE
0001h ~ 4000h
RECOMMENDED
SETTING
0020h (It varies depending upon using conditions)
To Next Page
Loading...