5. FASTENING SETTING mode (Type S)
5-62
5.6.4 USB stored file
USB stored directory and file name are as below.
Stored directory : ¥DAT0000
File name : Designated file name
If not designated, BKUP, BKUP1, BKUP2 or BKUP3
Extension : Type M = .dms
Type S = .dss
Extension is added automatically.
The format of the setting file is compatible with the SDN-UITW USER INTERFACE TERMINAL, so mutual
setting file can be used. Copy the setting file to this directory to write the setting file from UIT.
Upper-case letter or lower-case letter is not classified. Usage character or its numbers are under restrictions.
Refer to page number of 5-55 for details.
To Next Page