Sanyo SDNR - About MANUAL

1. General
1-6
1.4 About MANUAL
Please read this manual about DATA DISPLAY, MAINTENANCE, TORQUE CURVE, FASTENING SETTING
and so on about NUTRUNNER.
Please refer to the manuals as below about connecting the unit except for NUTRUNNER (PLC and etc.).
SDN-DPH is compatible with V8 series of Hakko Electronics co., Ltd. Please get these manuals by the method
as below. If they are difficult to get, please contact us.
MANUAL NAME CONTENTS REFERENCE
V8 Series Reference Manual
Functions of the MONITOUCH V8 series are
explained in details.
・From V-SFT5
・Download from HP
V8 Series Reference Additional
Functions
Additional functions of the MONITOUCH V8
series are explained in details.
・From V-SFT5
・Download from HP
V Series Macro Reference
An overview of macros of V-
SFT version 5 as
well as
macro editor operations and macro
command descriptions.
・From V-SFT5
・Download from HP
V8 Series Introduction Manual
The basic operating procedure of V-
SFT version
5 is explained in detail.
・From V-SFT5
・Download from HP
V8 Series Connection Manual
Connection with PLCs
and wiring diagrams or
universal serial communication are contained.
・From V-SFT5
・Download from HP
V806 Series Hardware
Specifications
Hardware specifications for V806 series ・Download from HP
V8 Series Hardware
Specifications
Hardware specifications for V8 series ・Download from HP
Table 1.4-1 V8 manuals