Sanyo SDNR - System Setting

15. Sample settings
15-2
15.1 System setting
 Standard setting values are shown as follows.
●COMMON SETTING

 TYPE S
ITEM
SETTING
Torque unit N.m
Emergency stop N.O.
Data Output Format BCD
Input Filter NORMAL
Angle Indication ***.*
RS323C Communication baud rate 4.8Kbps
 TYPE M
ITEM
SETTING
Torque unit N.m
DR Emergency Stop N.O.
MC Emergency Stop N.O.
Fastening Mode Multi
Count Up AUTO
Retry Data Clear
Data Output Format BCD
Input Filter NORMAL
Angle Indication ***.*
● AUXILIARY PARAMETER
ITEM
SETTING
T/T Offset Max. 00C8
T/T Calibration Min. 061E
T/T Calibration Max. 065E
Brake Time 00C8
Trouble Socket Release Speed 0100
Trouble Socket Release Time 0032