5. FASTENING SETTING mode (Type S)
5-34
5.3.3 PROGRAM DRIVER COPY
The DRIVER COPY is the function that allows a fastening program to be copied between DRIVERS.
●PROGRAM DRIVER COPY
1) Select the PROGRAM DRIVER COPY from the PROGRAM SETTING menu. The following screen will
be displayed.
Figure 5.3-18 PROGRAM DRIVER COPY
2) Input the No. of NUTRUNNERS and PROGRAM No that is to be copied.
Press EXEC to copy the selected program.
Press QUIT to abort the copy and return to the PROGRAM SETTING menu.
To Next Page