8. MAINTENANCE mode
8-8
8.3 ANGLE DATA
The angle value measured by the angle sensor is displayed in real time. You are recommended to use it to
confirm the proper function of the angle sensor and the motor cable (encoder cable).
●ANGLE DATA display
The angle value of the connected NUTRUNNER is displayed in real time. The present angle value is
reset, when the ANGLE DATA mode is started. The NUTRUNNER for which a connection cannot be
confirmed is indicated by 「0 (Grey color)」. Numbers from 01 to 32 indicate the NUTRUNNER No.
Press EXIT to return to the MAINTENANCE MENU.
Figure 8.3-1 ANGLE DATA
To Next Page