Sanyo SDNR - Change by Writing Read Area of I;O Memory

4. Operation outline
4-12
4.7.3 Change by writing Read Area of I/O memory
Screen No. can be changed by writing screen No. to Read Area n+2.
I/O1-082 is reserved as Read Area n+2. Access this memory indirectly to use Device Memory Map or Macro
command.
Write No.600 to the screen No. for returning NR mode.
Refer to ‘Chapter 16 Connection with PLC or other devices’ for I/O memory and Device Memory Map.
Refer to ‘V8 Series Connection Manual’ for detail of Device Memory.
Refer to ‘V Series Macro Reference’ for detail of Macro command.