DISPLAY PANEL MANUAL
5-35
5.3.4 PROGRAM No. COPY
The PROGRAM COPY is the function that allows a tightening program to be copied to another program No. in
the same DRIVER.
● PROGRAM No. COPY
1) Select the PROGRAM No. COPY from the PROGRAM SETTING menu. The following screen will be
displayed.
Figure 5.3-19 PROGRAM No. COPY
2) Input the “Copy NR. No.“, the “From Program No.“ and the “To Program No.”.
Press EXEC to copy the selected program.
Press QUIT to abort copying of the program and return to the PROGRAM SETTING menu.
To Next Page
Loading...