DISPLAY PANEL MANUAL
6-15
6.6.3 EXTERNAL INTERLOCK SETTING
The usage of interlocks between the MULTI CONTROLLER and external device is set per each program No.
for the interlock level from 1 to 4 in the program interlock command.
●EXTERNAL INTERLOCK USAGE SETTING
1) Select the EXTERNAL INTERLOCK from the MULTI CONTROL SETTING menu. The following
screen will be displayed.
Figure 6.6-5 EXTERNAL INTERLOCK SETTING
2) Press touch switch of the desired setting item.
Press EXEC to write the settings to the NUTRUNNER.
Press QUIT to cancel all edits and return to the MULTI CONTROL SETTING menu.
To Next Page