DISPLAYPANELMANUAL
3-3
3.1.2 The environmental conditions for operation
1) Avoid installing the DISPLAY PANEL in the following locations.
・ Near fire or in places of high temperature and humidity
・ Where it is subjected to direct sunlight
・ Where ventilation is improper
・ Where it is subjected to substantial shocks or vibrations
・ Where strong electromagnetic fields occur
・ Where it may come in contact with corrosive gases
・ Where it is subjected to dust, iron powder or oil mist
・ Where it is exposed in the sea breeze
・ Where it is subjected to rapid temperature changes
・ Where chemicals are handled
2) Take care to ensure that dust, dirt, garbage, etc. do not enter within the DISPLAY PANEL during
storage.
3) Occasionally wipe the unit with a dry soft cloth. If necessary, use a slightly moistened cloth.
4) Do not use a cloth that has been exposed to chemicals such as the benzene or paint thinner.
5) Do not dismantle and repair by yourself.
6) The surface of the touch switch is a film. Be careful not to push it with sharp parts, such as a
mechanical pencil etc.
7) Rest your eyes periodically if using for a prolonged period of time.
8) The touch panel is made of glass. Prevent it from becoming damaged.
To Next Page
Loading...