Sanyo SDNR - Page 55

DISPLAY PANEL MANUAL
5-1
Chapter 5 FASTENING SETTING mode
(Type S)
The contents and basic operations of the FASTENING SETTING mode for the NUTRUNNER Type S are
described in this chapter. Read this chapter when you want to confirm or change the fastening settings.
5.1 The FASTENING SETTING mode ..................................................................................................... 5-2
5.2 SYSTEM SETTING .......................................................................................................................... 5-4
5.2.1 COMMON SETTING.................................................................................................................. 5-5
5.2.2 SPINDLE SETTING ................................................................................................................... 5-8
5.2.3 MONITOR ITEM SETTING........................................................................................................5-11
5.2.4 DATA OUTPUT ITEM SETTING.................................................................................................5-13
5.2.5 AUXILIARY PARAMETER..........................................................................................................5-15
5.2.6 SYSTEM DRIVER COPY..........................................................................................................5-17
5.3 PROGRAM SETTING......................................................................................................................5-18
5.3.1 CODE PROGRAM....................................................................................................................5-19
5.3.2 SELECT PROGRAM.................................................................................................................5-20
5.3.3 PROGRAM DRIVER COPY.......................................................................................................5-34
5.3.4 PROGRAM No. COPY..............................................................................................................5-35
5.4 PARAMETER SETTING..................................................................................................................5-36
5.4.1 CONTROL PARAMETER ..........................................................................................................5-38
5.4.2 NG PARAMETER......................................................................................................................5-39
5.4.3 TROUBLE PARAMETER...........................................................................................................5-40
5.4.4 PARAMETER SWITCH.............................................................................................................5-41
5.4.5 PARAMETER DRIVER COPY....................................................................................................5-44
5.4.6 PARAMETER No. COPY...........................................................................................................5-45
5.5 REVERSE SETTING.......................................................................................................................5-46
5.5.1 REVERSE SETTING.................................................................................................................5-47
5.5.2 REVERSE DRIVER COPY........................................................................................................5-49
5.6 BACKUP ........................................................................................................................................5-50
5.6.1 BACKUP MEMORY (Built-In Flash Memory)................................................................................5-51
5.6.2 USB MEMORY.........................................................................................................................5-54
5.6.3 USB BACKUP ..........................................................................................................................5-58
5.6.4 USB stored file..........................................................................................................................5-62