Further notes
You show the settings for the commit mode with the show wlan device command.
See also
show wlan device (Page 194)
commit wlan-settings (Page 207)
7.1.4.3 commit wlan-settings
Description
With this command, you confirm modified WLAN settings. The modified WLAN settings are
then effective on the SCALANCE W700 device.
Requirement
● Manual is set in Commit mode.
You are in the WLAN configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Syntax
Call the command without parameter assignment:
commit wlan-settings
Result
The changes are confirmed and effective.
See also
commit mode (Page 206)
7.1.4.4 country
Description
With this command, you specify the country in which the SCALANCE W700 device will be
used.
Network structures
7.1 WLAN
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 207
To Next Page
Loading...
Need help?
General
