Syntax
Call up the command with the following parameters:
show user-accounts [external]
The parameter has the following meaning:
Parameter Description Range of values / note
external Keyword for the table "External User Accounts" -
If you do not specify the optional parameters, the local users are shown.
Result
The created users are shown.
Further notes
You create a new local user and create an entry in the table "External User Accounts" with the
user-account command.
You link a user created on an external server with a role on the device in the table External
User Accounts" with the user-account-ext command.
You delete a local user and the corresponding entry in the table "External User Accounts" with
the no user-account command.
You delete a link in the table "External User Accounts" with the no user-account-ext
command.
11.1.3.5 show user-groups
Description
This command shows the links between groups and roles.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show user-groups
Security and authentication
11.1 User rights management
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 475
To Next Page
Loading...
