Result
The configured SNMP target parameters are displayed.
8.6.1.11 show snmp user
Description
This command shows the settings for the SNMP users.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp user
Result
The settings for the SNMP users are displayed.
8.6.1.12 show snmp viewtree
Description
This command shows the settings for the SNMP tree view.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp viewtree
Network protocols
8.6 SNMP
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
412 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
