Siemens SCALANCE W738-1 M12 Configuration Guides

11.1.3.1 show password-policy
Description
This command shows which password policy is currently being used.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show password-policy
Result
The currently valid password policy is displayed.
Further notes
You configure the password policy with the password policy command.
11.1.3.2 show function-rights
Description
With this command, you list the available function rights in a table.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show function-rights
Security and authentication
11.1 User rights management
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 473

Siemens SCALANCE W738-1 M12 Specifications

General

Brand	Siemens
Model	SCALANCE W738-1 M12
Category	Wireless Access Point
Language	English