show vlan[brief|id<vlan-range>|summary]
The parameters have the following meaning:
Parameter Description Range of values / note
brief Shows brief information about all VLANs -
id Keyword for a VLAN or VLAN range -
vlan-range Number of the addressed VLAN or
VLAN range
1 ... 4094
Enter the range limits with a hy‐
phen or a space.
summary Shows a summary of the VLANs
If you do not select any parameter from the parameter list, the entries of all available interfaces
are displayed.
Result
The information for the selected VLAN is displayed.
7.2.1.6 show vlan device info
Description
This command shows all the global information that is valid for all VLANs.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show vlan device info
Result
The global information is displayed.
Network structures
7.2 VLAN
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 283
To Next Page
Loading...
Need help?
General
