Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events fault counter
Result
The number of indicated faults is displayed.
12.1.1.7 show logbook
Description
With this command, you display the content of the logbook. The log entries are categorized
differently.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show logbook
or
Call up the command with the following parameters:
show logbook { info | warning | critical }
The parameters have the following meaning:
Parameter Description
info All log entries of the categories "Information", "Warning" and "Critical" are
displayed.
warning All log entries of the categories "Warning" and "Critical" are displayed.
critical All log entries of the category "Critical" are displayed.
Diagnostics
12.1 Diagnostics
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 585
To Next Page
Loading...
Need help?
General
