Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
user-group <user-group-name> role <role-name> [description <user-
group-description>]
The parameters have the following meaning:
Parameter Description Range of values / note
user-group Keyword for a group name -
user-group-name Group name Enter the name of the group. The name
must match the group on the RADIUS
server.
The name must meet the following condi‐
tions:
● It must be unique.
● It must be between 1 and 64
characters long.
role Keyword for the role name -
role-name Role name Enter a role name. Users who are author‐
ized with the linked group on the RADIUS
server receive the rights of this role locally
on the device.
You can choose between system-defined
and self-defined roles.
description Keyword for the description -
user-group-
description
Content of the description Enter a description for the link. The de‐
scription text can be up to 100 characters
long.
Result
The group is linked to a role.
Further notes
You delete a link with the no user-group command.
You show the created links with the show user-groups command.
Security and authentication
11.1 User rights management
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
484 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
Need help?
General
