Siemens SINAMICS G120 - Page 308

Setting functions
8.7 Application-specific functions
Inverter with CU230P-2 Control Units
308 Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
r2379
Cascade control - status word
p2380
Cascade control - operating hours
p2381
Cascade control - maximum time for continuous mode
p2382
Cascade control - absolute operating time limit
p2383
Cascade control - switch-off sequence
Define switch-off sequence for an OFF command
p2384
Cascade control - motor switch-on delay
Define motor switch-on delay
p2385
Cascade control - connect hold time
Define speed hold time after connecting an external motor
p2386
Cascade control - motor switch-off delay
Define motor switch-off delay
p2387
Cascade control - switch-off speed hold time
Define speed hold time after
disconnecting an external motor
For more information, see the parameter descriptions and function diagram 7036 in the List
Manual.