Backing up data and series commissioning
9.5 Write and know-how protection
Inverter with CU230P-2 Control Units
342 Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
– copies the encrypted project from the card to his PC
– for example, sends it by e-mail to the end customer
● The end customer copies the project to the Siemens memory card that belongs to the
machine, inserts it in the inverter and switches on the inverter.
When powering up, the inverter checks the serial numbers of the card and when there is a
match, the inverter goes into the "ready to start" state.
If the numbers do not match, then the inverter signals fault F13100 (no valid memory card).
To Next Page
Loading...
