EasyManua.ls Logo

Still RX20-20L - Traction; Safety Regulations When Driving

Still RX20-20L
454 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation 4
Traction
Traction
Safety regulations when driving
Driving conduct
The driver must follow the public rules of the
road when driving in company traffic.
The speed must be appropria
te to the local
conditions.
For example, the driver must drive slowly
around corners, in tight passageways, when
driving through swing-doors, at blind spots, or
on uneven surfaces.
The driver must always maintain a safe
braking distance from vehicles and persons in
front, and must always have the truck under
control. Stopping suddenly, turning quickly
and overtaking at dangerous or blind spots
must be avoided.
Initial driving practic
e must be carried out in
an empty space or on a clea
r roadway.
The following are forb
idden during driving:
Allowing arms and legs to hang outside the
truck
Leaning the body over the outer contour of
the truck
Climbing out of the truck
Moving the driver's seat
Adjusting the steering column
Releasing the seat belt
Disabling the restraint system
Raising the load higher than 300 mm
above the ground (with the exception
of manoeuvring processes during the
placement into stock/removal from stock
of loads)
Using electronic devices, for ex
ample
radios, mobile phones etc.
563
68011531 EN - 06/2019 - 02 133

Table of Contents

Related product manuals