EasyManua.ls Logo

Still RX20-20L - Cab; Opening and Closing the Cab Door

Still RX20-20L
454 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation 4
Cab
Cab
6219_003-132
5
4
3
21
Opening and closing the cab door
DANGER
Risk of explosion due to static charge!
The plastic parts on category 2
trucks are coated with a special
antistatic paint. This paint prevents
the build-up of an electrostatic charge
in plastic components. Otherwise,
static discharge may occur, resulting
in explosions in the surrounding
atmosphere in potentially explosive
areas.
The plastic parts of the cab (variant)
are also covered with antistatic
materials or coated with antistatic
paint.
Only drive into potentially explosive
areas if the cab or fabric-covered
cab complies with explosion
protection directives.
Make sure that the surfaces are not
damaged.
CAUTION
Risk of component damage.
If the cab door opens while driving, there is risk of
damage from a collision.
The cab door must be latched securely in the
engaged position.
The truck has a cab door sensor that is used to
monitor the closing of the cab door.
If the seat
belt is not fastened and the cab door
is not closed
, the driving speed is limited to 4
km/h. The mess
age
Close cab door or
seat belt
appear
s in the display.
If the cab door is opened while the truck is in
motion and the seat belt is fastened, the truck
decelerates and is restricted to a driving speed
of 4 km/h. The message
Close cab door
appears in the display.
If the seat belt is released with the cab door
closed, no message appears.
563
68011531 EN - 06/2019 - 02 265

Table of Contents

Related product manuals