Foreword 1
Using the truck
Trucks for use in zone 1 are automatically
approved for use in zone 2. Depending on the
zone classification, the trucks' operating and
display elements may be enclosed in a special
housing. Gases and vapours are divided into
temperature classes T1 to T6 and permissible
equipment surface temperatures are defined.
Temperature classes
Temperature
class
Ignition temperature range
Maximum surface temperature
T1
> 450°C 450°C
T2
> 300°C to 450°C 300°C
T3
> 200°C to 300°C 200°C
T4
> 135°C to 200°C 135°C
T5
> 100°C to 135°C 100°C
T6
> 85°C to 100°C 85°C
.
Commissioning
Commissioning is
the initial intended use of
the truck.
The necessary steps for the commissioning
vary depending on the model and equipment
of the truck. These steps require preparatory
work and adjustment work that cannot be per-
formed by the operating company. See also
the chapter entitled "Definition of responsible
persons".
– To commission the truck, contact the
authorised service centre.
Proper use
The truck described in these operating in-
structions is suitable for lifting, transporting
and stacking loads.
The truck may
only be used for its proper
purpose as se
t out and described in these
operating i
nstructions.
The industrial truck may only be used in
the areas at risk of explosion for which it is
563
68011531 EN - 06/2019 - 02 21
To Next Page
Loading...
