Operation 4
Dynamic Load Control
Precision load measurement
(variant)
This function is available only if the truck
is equipped with the "load measurement"
variant.
The "precision load measurement" variant
allows the weight of the load being picked
up to be measured and displayed on the
display-operating unit accurate to within 1% of
the rated load capacity of the truck.
NOTE
In order to avoid a weighing error, tare the
empty load pick up; see the section entitled
"Tare function (variant)".
– Pick up the load safely.
– Press the button
.
The first menu level appears.
– Press the "Load" softkey
.
0,0°
0,70
m
1,5 t
--,-- t
6219_003-222
1
– Press the "precision load measurement"
softkey
(1).
563
68011531 EN - 06/2019 - 02 215
To Next Page
Loading...
