Operation 4
Traction
6219_003-026
1
2
Applying the mechanical parking
brake
DANGER
There is a risk of fatal injury from being
run over if the truck rolls away.
– The truck must not be parked on a
slope.
– In emergencies, secure the truck
using wedges on the side facing
downhill.
– Only leave the truck when the
parking brake has been applied.
Applying the parking brake
– Pull the parking brake lever (1) back fully
and release it.
The parking brake lever engages. The parking
brake is applied. The wheels on the drive axle
are blocked. The message
Parking brake
active
appears briefly on the display of
the display-operating unit. The "parking
brake" symbol
appears on the display
in place of the speed information.
Releasing the parking brake
– Pull the parking brake lever (1) back.
– Push down the knob (2) and hold it down.
– Move the parking brake lever (1) forwards
and release both the lever and the knob.
The parking brake is released.
NOTE
The parking brake lever swivels to the forward
position automatically via spring force and
requires only gentle manual guidance. If the
movement of the parking brake is stiff, notify
the authorised service centre.
After the parki
ng brake has been released, the
previously sel
ected drive direction is retained
and is shown on th
e drive direction indicator.
563
68011531 EN - 06/2019 - 02 151
To Next Page
Loading...
