1 Foreword
Your truck
5060_901-020
1
2
3
4
5
6
1 Serial number
2 CE labelling
3 Year of manufacture
4 Approved area of application
5 Inspection number
6 Manufacturer
Nameplate of the pressure-ti
ght
housing
The pressure-tight housing
s are marked with a
nameplate. The data on the pl
ate corresponds
to the approved area of appli
cation for the
pressure-tight housing. Th
eplatemustbe
positioned so that it is al
ways easy to read.
Only the manufacturer is a
llowed to re-label
the pressure-tight housi
ngs.
A note is printed on the label: "To avoid the
ignition of combustible gases or vapours, do
not remove the cover when the circuits are
active or in potentially explosive areas."
In close proximity to the nameplate there is a
warning sign: "Open only in a non-potentially
explosive area".
7090_921-004
xx xxxx x xxxxx
1
2
3
4
Production number
NOTE
The production number is used to identify the
truck. It can be found on the nameplate and
must be referred to in all technical questions.
The production number contains the following
coded information:
(1) Production location
(2) Model
(3) Year of manufacture
(4) Sequential number
14 5
6368011531 EN - 06/2019 - 02
To Next Page
Loading...
