5 Maintenance
General maintenance information
– The Miretti job number can be found on the
nameplate of the truck.
Quality and quantity of the required
operating materials
Only the operating materials specified in the
maintenance data table may be used.
– The required consumables and lubricants
can be found in the maintenance data table.
Oil and grease types of a di
fferent quality
must not be mixed. This neg
atively affects
the lubricity. If a change
between different
manufacturers cannot be
avoided, drain the
old oil thoroughly.
Before carrying out lubricating work, filter
changes or any work on the hydraulic system,
carefully clean the area around the part
involved.
When topping up working materials, use only
clean containers!
370
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
