4 Operation
Cleaning the truck
– Do not aim the cleaning jet directly at
adhesive labels or decal information.
– Remove all deposits and accumulations
of foreign materials in the vicinity of hot
components.
– Use only non-flammable fluids fo
r cleaning.
– Observe the manufacturer's guidelines for
working with cleaning materials.
– Clean plastics only with cleaning materials
intended for plastics.
– Observe the manufacturer'
s guidelines for
working with cleaning mate
rials.
– Clean the truck exterior using water-soluble
cleaning materials and water. Cleaning
with a water jet, a sponge or a cloth is
recommended.
– Clean all accessible areas.
– Before lubrication, cle
an the oil filling
openings and the area aro
und the oil filling
openings, as well as the
lubricating nipples.
Cleaning the electric
al system
WARNING
Danger of electric shocks due to residual capacity!
– Never reach into the electrical system with your
bare hands.
CAUTION
Cleaning electrical system parts
with water can damage the electrical
system.
Cleaning electrical system parts with
water is forbidden!
– Do not remove covers etc.
– Only use dry cleaning materials
according to the specifications in
the section "Cleaning the truck".
The comp
onents of the electrical system
are fitt
ed underneath the cover sheet of the
counterw
eight etc.
344
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
