Operation 4
Attachments
General instructions for controlling
attachments
Attachments can be controlled via the first four
hydraulic functions but also as a variant via the
5th or 6th function. The 5th or 6th function
is activated via a button on the operating
device and by moving the operating device
or additional push buttons.
The way in which attachments (variant) are
controlled depends on the operating devices
included in the truck's equipment.
Possible equipment variants include:
• Multi-lever
• Multi-lever with a 5th or 6th function (variant)
• Double mini-lever
• Double mini-lever with a
5th function
(variant)
• Triple mini-lever
• Triple mini-lever with a 5th function (variant)
• Quadruple mini-lever
• Quadruple mini-lever with a 5th function
(variant)
• Fingertip
• Fingertip with a 5th fun
ction (variant)
• Joystick 4Plus
• Joystick 4Plus with a 5th function (variant)
– To control attachmen
ts, see the sections
relating to the respect
ive operating devices
in this chapter.
563
68011531 EN - 06/2019 - 02 229
To Next Page
Loading...
