4 Operation
Attachments
WARNING
Use of attachments can give rise to additional
hazards such as a change in the centre of gravity,
additional danger areas etc.
Attachments must only be deployed for their in-
tended use as described in the relevant operating
instructions. Drivers must be taught how to operate
the attachments.
Loads may only be picked up and transported with
attachments if the loads are securely grasped and
attached. If necessary, the loads must also be
secured against slipping, rolling away, falling over,
swinging and tipping over. Note that any change to
the location of the load centre of gravity will affect
the stability of the truck.
– Observe the capacity rating plate for the attach-
ments being used.
NOTE
Further variants and functions are available
in addition to the functions described below.
The directions of movement can be seen in the
pictograms on the operating devices. All the
attachments described fall into the category
of equipment variants. An exact description
of the respective movements or actions of the
attachment fitted can be found in the relevant
operating instructions.
230
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
