EasyManua.ls Logo

Still RX20-20L - Load measurement (variant)

Still RX20-20L
454 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Operation
Handling loads
– Tilt the lift mast backwards.
The load can be transported.
Transporting loads
NOTE
Observe the information in the chapter entitled
"Safety regulations when driving".
DANGER
The higher a load is lifted, the less stable it beco-
mes. The truck can tip over. The load can fall.
There is an increased risk of accidents.
Driving with a raised load and the lift mast tilted
forward is not permitted.
– Only drive with the load lowered.
– Lower the load until ground clearance is reached
(not over 300 mm).
– Only drive with the lift mast tilted backwards.
198
56368011531 EN - 06/2019 - 02

Table of Contents