EasyManua.ls Logo

Still RX20-20L - Driving on Ascending and Descending Gradients

Still RX20-20L
454 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Operation
Handling loads
Lower the load until it rests securely on the
rack.
DANGER
Risk of accident!
Beware of any people in the danger area.
Ensure that the roadway behind you is clear.
Move the truck back until the fork arms can
be lowered without touching the stack.
Lower the fork while maintaining ground
clearance.
Tilt the lift mast backwards and drive away.
Driving on ascending and descend-
ing gradients
DANGER
Risk of fatal injury!
Driving on ascending and descending gradients
carries special dangers!
Always follow the instructions below.
On ascending and descending gradients,
the load must be carried facing uphill.
It is only permitted to drive on ascending
and descending gradients that are marked
as traffic routes and that can be used safely.
Ensure that the ground to be traversed is
clean and provides a good grip.
Do not turn on ascending and descending
gradients.
Do not drive onto or along ascending and
descending gradients at an angle.
Do not park the truck on ascending or
descending gradients.
In case of emergency, secure the truck with
wedges so that the truck does not roll away.
Reduce the driving speed on descending
gradients.
204
56368011531 EN - 06/2019 - 02

Table of Contents

Related product manuals