Operation 4
Handling loads
880 kg
5230 mm
500 mm
1
2
3
Example
Weight of load to be lifted: 880 kg (3)
Load distance from fork back: 5
00 mm (1)
Permitted lift height: 5230 mm (2)
WARNING
Risk of accident from the truck losing stability!
The permissible loading of the attachments (va-
riant) and the reduced load capacity of the combi-
nation of truck and attachment must not be excee-
ded.
– Observe the special capacity rating plate infor-
mation shown on the truck and the attachment.
Pickinguploads
To make sure that the load is securely sup-
ported, it must be ensured that the fork arms
are sufficiently far apart and are positioned as
far as possible under the load.
If possible, the load should rest on the back of
the fork.
The load must not protrude too far over the
fork tips, nor should the fork tips protrude too
far out from the load.
Loads are to be picked up and transported as
close to the middle as possible.
563
68011531 EN - 06/2019 - 02 191
To Next Page
Loading...
