4 Operation
Procedure in emergencies
Procedure in emergencies
2
6219_901-014
Emergency shutdown
WARNING
No electric braking assistance is available if the
emergency off switch or the battery isolating switch
has been actuated.
Actuating the emergency off switch (1) disconnects
the drives from the power supply. Actuating the
battery isolating switch (2) disconnects the entire
truck from the power supply.
The truck will not be held on a slope by the regene-
rative brake.
– To brake, actuate the service brake.
CAUTION
Potential for dam
age to the battery male connector!
If the battery mal
e connector is disconnected while
the truck is swit
ched on (under load), an arc will be
produced. This c
an lead to erosion at the contacts,
which consider
ably shortens the service life of the
contacts.
– Switch off th
e truck before the battery male
connector is
disconnected.
– Do not disco
nnect the battery male connector
while the tr
uck is switched on, except in an
emergency
.
In an emerg
ency, all functions of the truck can
be shut down:
– Press the emergency off switch (1) or turn
the battery isolating switch (2) to "OFF".
In drive mode, pressing the emergency off
switch (1) or turning the battery isolating
switch (2) has the following effects:
• No reduction in truck speed when the
accelerator pedal is released, according
to the drive programme selected. The truck
will coast to a stop.
• The electric
brake does not function during
the first part
of brake pedal travel:
To decelerate the truck with the mechanical
brake, the brake pedal has to be pressed
down further.
• The truck can only be held on a slope using
the mechanical brake, not the electric
brake.
296
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
