5 Maintenance
General maintenance information
Maintenance data table
DANGER
Risk of explosion due to static charge!
If bio-hydraulic oils are used, hydraulic
systems become prone to the build-up
of static charges. This can lead to sta-
tic discharge; in potentially explosive
areas, this can subsequently lead to
explosions in the surrounding atmo-
sphere.
–Donot use bio-based hydraulic oils.
General lubrication points
Code
Unit
Operating materials
Specifications
Dimension
Lubrication High-pressure
grease
ID no. 0147873 As required
Battery
Code
Unit
Operating materials
Specifications
Dimension
System filling
Distilled water As required
Insulation resistance DIN 43539
VDE 0510
For further
information, r
efer
to the workshop
manual for the t
ruck
in question.
Electrical system
Code
Unit
Operating materials
Specifications
Dimension
Insulation resistance DIN EN 1175
VDE 0117
For further
informatio
n, refer
to the works
hop
manual for t
he truck
in question
.
Controls/joints
Code Unit
Operating materials
Specifications
Dimension
High-pressure
grease
ID no. 0147873 As requiredLubrication
Oil SAE 80
MIL-L2105
API-GL4
As required
Dual-pedal
operation
High-pressure
grease
ID no. 0147873 As required
372
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
