Still RX20-20L - Checking the condition and correct operation of the latch

Maintenance 5
General maintenance information
Hydraulic system
Code Unit
Operating materials
Specifications
Dimension
Hydraulic oil HVLP 68
DIN 51524, Part 3
System filling
Hydraulic oil for cold
store application
HVLP 68
DIN 51524, Part 3
23 to 30 l
Dependent on the lift
mast and lift height
NOTE
When changing to a different type of hydraulic
oil, the authorised service centre must adjust
the truck control unit.
Tyres
Code Unit
Operating materials
Specifications
Dimension
Superelastic tyres
Wear limit To wear mark
Solid rubber tyres
Wear limit To wear mark
Pneumatic tyres Minimum tread depth Air pressure: see
informationontruck
Min. tread depth:
1.6 mm
Steering axle
Code
Unit
Operating materials
Specifications
Dimension
(A)
Axle stub bearin
g,
spherical bearing
High-pressure
grease
ID no. 0147873 As required
Swing axle
195 Nm
Wheel nuts
Torque wrench
Steering axle
195 Nm
Drive axle
Code Unit
Operating materials
Specifications
Dimension
Wheel screws Torque wrench 210 Nm
Wheel gear
Gearbox oil SAE 80W-90
API-GL4
0.3 l
Lift mast
Code
Unit
Operating materials
Specifications
Dimension
(B)
Lubrication High-pressure
grease
ID no. 0147873 As required
Stop
Play Min. 2 mm
563
68011531 EN - 06/2019 - 02 373