5 Maintenance
Preserving operational readiness
Code
Unit
Operating materials
Specifications
Dimension
(D)
Lift mast bearing Grease
Aralub 4320
DIN 51825-KPF2N20
ID no. 0148659
Fill with grease until a
small amount of fresh
grease escapes
Screws for the lift
mast bearing
Torque wrench 310 Nm
Load chains
Code Unit
Operating materials
Specifications
Dimension
(C)
Lubrication High-load chain
spray
Fully synthetic
Temperature range:
-35°C to +250°C
ID no. 0156428
As required
Washer system
Code
Unit
Operating materials
Specifications
Dimension
System filling Screen wash
Winter, ID no. 172566 As required
Flame proof enclosu
re
Code Unit
Operating materials
Specifications
Dimension
Gap
Feeler gauge < 0.05 mm
Cover screws
Torque wrench M5
M6
M8
M10
2.5to5Nm
5to10Nm
10 to 20 Nm
20 to 40 Nm
Column Grease
Aluminium-
saponified,
ID no. 0170761
As required
Truck control unit Desiccant
(hygro bag)
As required
.
Preserving operational readiness
Changing the light bulb
DANGER
Risk of explosion if incorrect light bulbs are used!
The lighting of the truck is designed to enable it to
enter approved zones. Other light bulbs increase
surface temperatures. Use in potentially explosive
areas is prohibited if other light bulbs are employed.
– Light bulbs must only be changed by an authori-
sed service centre.
374
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
