5 Maintenance
Preserving operational readiness
1
6210_800-020
Lubricating the lift mast and
roller
track
– Remove dirt and lubricant re
sidue from the
roller track.
– Lubricate the roller tracks (1) of the outside,
middle, and inside mast with a super-
pressure adhesion lubricant to reduce
wear. See ⇒ Chapter "Maintenance data
table", P. 5-372.
NOTE
Spray the roller track evenly from a distance of
approx. 15-20 cm. Wait approx. 15 minutes
until the equipment is ready to use again.
6210_900-002
Preserving operational readiness for
cold store application
– On trucks for cold store application (vari-
ant), check all rollers and chains in the lift
mast for ease of movement once a week.
394
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
