Maintenance 5
Preserving operational readiness
ENVIRONMENT NOTE
Carefully collect any spilt hydraulic oil. Dis-
pose of this hydraulic oil in accordance with
environmental regulations.
The marks (1), (2) and (3) indicate the required
filling levels for the different lift mast versions.
The uppermost mark (max) indicates the
maximum filling quantity for a triple mast with
a lift height ≥ 2360 mm.
Assignment of the lift mast version to the mark on the dipstick
Lift height [mm]
Telescopic lift mast
Triple mast
Marking
1.6 to 1.8 t 2.0 t 1.6 t 1.8 t 2.0 t
1 ≤ 3010 ≤ 2610 ≤ 2110 ≤ 2160 ≤ 1910
2 3060...3260 2660...3260 2160...2660 2210...2710 1960...2310
3
--
≥ 2710 ≥ 2760 ≥ 2360
CAUTION
Risk of damage.
If the hydraulic oil level is too low, the steering is
restricted and the pump may be damaged.
– If the oil level is too low, do not use the truck and
contact the authorised service centre.
– Screw in the breather filter and the dipstick
in a clockwise direction.
– Close the bottom plate again.
– Connect the batt
ery male connector.
563
68011531 EN - 06/2019 - 02 393
To Next Page
Loading...
